Slipfence 91 in. x 1-14 in. x 1-14 in. Black Aluminum Fence Channels for 8ft. High fence 2 per pack includes screws SF2-HCK08

Add warmth and privacy to your yard this year with the Slipfence Horizontal Fence system. This Aluminum Channel Kit includes 2 (two) channels needed to build one 8ft. high fence panel. This kit combined with the Slipfence Post Kit， SF2-PK312， provides a strong and long-lasting framework for your horizontal fence project. Attach these two channels to Slipfence Aluminum posts， then slip in regular 1 in. thick deck boards， (called 5/4 deck boards)， sold separately into these channels. The result is a warm， fully private， contemporary， horizontal wood fence that has the strength and endurance of an aluminum fence with the warmth and privacy of a wood fence.This system requires Slipfence Aluminum posts and a Slipfence pair of Cap Rails， either one for the bottom and one for the top of each panel， or one just for the top of each panel.Search SF2-PK312 for postsSearch SF2-HCR84-2 for Cap RailsOnce your Slipfence horizontal fence system is installed， the wood will appear too high for the channels. Please allow approximately 4-6 weeks for the wood to shrink and settle down to approximately 1\" above the tops of the two side channels and then cut your cap rail to size and slip it onto the top of each panel.

Inside channel width 1-1/8 in. to accommodate a 5/4 in. deck board with an actual thickness of 1 in.

Kit includes 2-channels 91 in. Long to hold 17 pcs. of 5/4" deck boards x 6 ft. long stacked.Buy 12 foot boards and cut to size of each panel on site.

Recommended to be used with Slipfence 12 foot long aluminum posts.12 ft. post: SF2-PK312 SKU No.311798902

Includes black stainless wood screws with star drive to fasten deck boards to channels

Can be used with Slipfence post kit or other aluminum fence posts

Screw holes are counter sunk for screws to sit flat leaving a nice flush surface inside channel to slide in deck boards

Recommended space between posts is 6 feet. If posts are set longer than 6 feet apart， It is recommended that one deck board be fastened to the back side of the fence panel after the board shrinking period of 6 weeks has passed to eliminate and board bowing or warping.

includes 10 stainless #12 x 5/8 in. star drive self-drilling screws to fasten channels to posts

Tools neededImpact Drill， #2， and #3 Star (Phillips)， driverThe aluminum blade on saw.

If 5/4 Deck boards are not available from your Home Depot store try the SLIPFENCE Industrial Channel kit that holds 2 x 6 boards for a more industrial look. SF2-IHCK6 SKU No. 320388076

Add custom text to promote products, specials or offers